§ 10-53. Standards adopted.
The following standards are hereby adopted by reference as part of this article, and such standards supplement but do not supersede the specific requirements set forth herein:
(a)
The following standards of the Air Conditioning and Refrigeration Institute, 1815 North Fort Meyer Drive, Arlington, Virginia 22209:
1.
ARI Standard 270. Standard for Sound Rating of Outdoor Unitary Equipment (1967).
2.
ARI Standard 275. Standard for Application of Sound Rated Outdoor Unitary Equipment (1969).
3.
ARI Standard 443. Standard for Sound Rating of Room Fan-Coil Air Conditioners (1970).
4.
ARI Standard 446. Standards for Sound Rating of Room Air Induction Units (1968).
(b)
The following standards of the American National Standards Institute, 1430 Broadway, New York, New York, 10018:
1.
ASA S1.1—1960. American Standard Acoustical Terminology.
2.
ASA S1.2—1962. American Standard Method for the Physical Measurement of Sound.
3.
ANSI S1.4—1971. American National Standard Specifications for Sound Level Meters.
4.
ANSI S1.13—1971. American National Standard Methods for the Measurement of Sound Pressure Levels.
5.
ANSI S5.1—1971. American National Standards Test Code for the Measurement of Sound From Pneumatic Equipment.
(c)
The following standards of the Society of Automotive Engineers, 2 Pennsylvania Plaza, New York, New York, 10001:
1.
SAE Recommended Practive J 184. Qualifying a Sound Data Acquisition System.
2.
SAE Recommended Practive 366. Exterior Sound Level For Heavy Trucks and Buses.
3.
SAE Standard J 952b. Sound Levels For Engine-Powered Equipment.
(d)
The following standards of the American Society of Heating, Refrigerating and Air Conditioning Engineers, United Engineering Center, 345 East 47th Street, New York, New York, 10017:
1.
ASHRAE Standard 36-62. Measurement of Sound Power Radiated from Heating, Refrigerating and Air Conditioning Equipment.
2.
ASHRAE Standard 36A-63. Method of Determining Sound Power Levels of Room Air Conditioners and Other Ductless, Through-The-Wall Equipment.
3.
ASHRAE Standard 36B-63. Method of Testing for Rating the Acoustic Performance of Air Control and Terminal Devices and Similar Equipment.
(e)
The following standards of the International Organization for Standardization, c/o the American Standards Institute, 1430 Broadway, New York, New York, 10018:
1.
ISO Recommendation R266. Preferred Frequencies for Acoustical Measurements (1962).
2.
ISO Recommendation R362. Measurement of Noise Emitted by Vehicles (1964).
3.
ISO Recommendation R532. Method for Calculating Loudness Level (1966).
4.
ISO Recommendation R495. General Requirements for the Preparation of Test Codes for Measuring the Noise Emitted by Machines (1966).
(Code 1966, § 10A-13)